Skip to main content

Running NEAR Lake Indexer

info

NEAR Lake is a blockchain indexer built on top of NEAR Indexer microframework to watch the network and store all the events as JSON files on AWS S3.

How to start​

The Lake Indexer setup consists of the following components:

  • AWS S3 Bucket as a storage
  • NEAR Lake binary that operates as a regular NEAR Protocol peer-to-peer node, so you will operate it as any other Regular/RPC Node in NEAR

Prepare Development Environment​

Before you proceed, make sure you have the following software installed:

  • Rust compiler of the version that is mentioned in rust-toolchain file in the root of nearcore project.

  • Ensure you have AWS Credentials configured From AWS Docs:

    For example, the files generated by the AWS CLI for a default profile configured with aws configure looks similar to the following.

    ~/.aws/credentials

    [default]
    aws_access_key_id=AKIAIOSFODNN7EXAMPLE
    aws_secret_access_key=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY

Compile NEAR Lake​

$ cargo build --release

Configure NEAR Lake​

To connect NEAR Lake to the specific chain you need to have necessary configs, you can generate it as follows:

$ ./target/release/near-lake --home ~/.near/testnet init --chain-id testnet --download-config --download-genesis

The above code will download the official genesis config and generate necessary configs. You can replace testnet in the command above to different network ID (betanet, mainnet).

nearcore configuration

According to changes in nearcore config generation we don't fill all the necessary fields in the config file. While this issue is open you need to download config you want and replace the generated one manually.

Configs for the specified network are in the --home provided folder. We need to ensure that NEAR Lake follows all the necessary shards, so "tracked_shards" parameters in ~/.near/testnet/config.json needs to be configured properly. Currently, nearcore treats empty value for "tracked_shards" as "do not track any shard" and any value as "track all shards". For example, in order to track all shards, you just add the shard #0 to the list:

...
"tracked_shards": [0],
...

Run NEAR Lake​

Commands to run NEAR Lake, after ./target/release/near-lake

CommandKey/SubcommandRequired/DefaultResponsible for
--homeDefault
~/.near
Tells the node where too look for necessary files:
config.json
,
genesis.json
,
node_key.json
, and
data
folder
initTells the node to generate config files in --home-dir
--chain-idRequired

_ localnet
_ testnet
* mainnet
Defines the chain to generate config files for
--download-configOptionalIf provided tells the node to download config.json from the public URL. You can download them manually

- testnet config.json
- mainnet config.json
--download-genesisOptionalIf provided tells the node to download genesis.json from the public URL. You can download them manually

- testnet genesis.json
- mainnet genesis.json
TODO:
Other neard keys
runRuns the node
--bucketRequiredAWS S3 Bucket name
--regionRequiredAWS S3 Bucket region
--fallback-regionDefault eu-central-1AWS S3 Fallback region
--endpointOptionalAWS S3 compatible API endpoint
--stream-while-syncingOptionalIf provided Indexer streams blocks while they appear on the node instead of waiting the node to be fully synced
--concurrencyDefault 1Defines the concurrency for the process of saving block data to AWS S3
sync-from-latestOne of the sync- subcommands is requiredTells the node to start indexing from the latest block in the network
sync-from-interruptionOne of the sync- subcommands is requiredTells the node to start indexing from the block the node was interrupted on (if it is a first start it will fallback to sync-from-latest)
sync-from-block --height NOne of the
sync-
subcommands is required
Tells the node to start indexing from the specified block height N (Ensure you node data has the block you want to start from)
$ ./target/release/near-lake --home ~/.near/testnet run --stream-while-syncing --concurrency 50 sync-from-latest

After the network is synced, you should see logs of every block height currently received by NEAR Lake.

Syncing​

Whenever you run NEAR Lake for any network except localnet you'll need to sync with the network. This is required because it's a natural behavior of nearcore node and NEAR Lake is a wrapper for the regular nearcore node. In order to work and index the data your node must be synced with the network. This process can take a while, so we suggest to download a fresh backup of the data folder and put it in you --home-dir of your choice (by default it is ~/.near)

tip

Running your NEAR Lake node on top of a backup data will reduce the time of syncing process because your node will download only the data after the backup was cut and it takes reasonable amount time.

All the backups can be downloaded from the public S3 bucket which contains latest daily snapshots:

You will need AWS CLI to be installed in order to download the backups.

Mainnet​

$ aws s3 --no-sign-request cp s3://near-protocol-public/backups/mainnet/rpc/latest .
$ LATEST=$(cat latest)
$ aws s3 --no-sign-request cp --no-sign-request --recursive s3://near-protocol-public/backups/mainnet/rpc/$LATEST ~/.near/data

Testnet​

$ aws s3 --no-sign-request cp s3://near-protocol-public/backups/testnet/rpc/latest .
$ LATEST=$(cat latest)
$ aws s3 --no-sign-request cp --no-sign-request --recursive s3://near-protocol-public/backups/testnet/rpc/$LATEST ~/.near/data

Running NEAR Lake as an archival node​

It's not necessary but in order to index everything in the network it is better to do it from the genesis. nearcore node is running in non-archival mode by default. That means that the node keeps data only for 5 last epochs. In order to index data from the genesis you need to turn the node in archival mode.

To do it you need to update config.json located in --home-dir (by default it is ~/.near).

Find next keys in the config and update them as following:

{
...
"archive": true,
"tracked_shards": [0],
...
}

The syncing process in archival mode can take a lot of time, so it's better to download a backup provided by NEAR and put it in your data folder. After that your node will download only the data after the backup was cut and it takes reasonable amount time.

All the backups can be downloaded from the public S3 bucket which contains the latest daily snapshots.

See this link for reference

Using the data​

We write all the data to AWS S3 buckets:

  • near-lake-data-testnet (eu-central-1 region) for testnet
  • near-lake-data-mainnet (eu-central-1 region) for mainnet

Custom S3 storage​

In case you want to run you own near-lake instance and store data in some S3 compatible storage (Minio or Localstack as example) You can override default S3 API endpoint by using --endpoint option

  • run minio
$ mkdir -p /data/near-lake-custom && minio server /data
  • run near-lake
$ ./target/release/near-lake --home ~/.near/testnet run --endpoint http://127.0.0.1:9000 --bucket near-lake-custom sync-from-latest

Data structure​

The data structure we use is the following:

<block_height>/
block.json
shard_0.json
shard_1.json
...
shard_N.json
  • <block_height> is a 12-character-long u64 string with leading zeros (e.g 000042839521). See this issue for a reasoning
  • block_json contains JSON-serialized BlockView struct. Note: this struct might change in the future, we will announce it
  • shard_N.json where N is u64 starting from 0. Represents the index number of the shard. In order to find out the expected number of shards in the block you can look in block.json at .header.chunks_included

Access the data​

All NEAR Lake AWS S3 buckets have Request Payer enabled. It means that anyone with their own AWS credentials can List and Read the bucket's content and be charged for it by AWS. Connections to the bucket have to be done with AWS credentials provided. See NEAR Lake Framework for a reference.

NEAR Lake Framework​

Once we set up the public access to the buckets anyone will be able to build their own code to read it through.

For our own needs we are working on NEAR Lake Framework to have a simple way to create an indexer on top of the data stored by NEAR Lake itself.

note

See the official NEAR Lake Framework announcement on the NEAR Gov Forum.

Was this page helpful?